Description

Garelick I-O Swim Platform with Telescope Ladder

• For use on Inboard/Outboard transoms
• Stainless steel wrap-around 1″ diameter rails
• Mounts at a 10 angle on transom
• Durable, high density, white polyethylene platform (18″W X 15-1/2″D X 3/4″H)
• Rail Height 12-1/2″ above and below platform
• Electropolished stainless steel 2 step ladder
• Ladder steps telescope down easily
• Poly comfort steps
• Stainless steel hardware
• Length deployed: 22-3/4″
• Length stowed: 17″ Overall height: 5″ Width: 13.5″

Mounting Instructions

HOW TO MOUNT GARELICK OUT BOARD I-O SWIM PLATFORM WITH TELESCOPING LADDER

Mounting Instructions:

• Mount hand rails to platform by inserting 4 bolts through holes in platform. Secure with 4 locknuts.
• Mount SS strut 22 by inserting bolt through hole and secure with locknut.
• Mount SS strut 11 by inserting two bolts through holes and secure with 1 locknut.
• Choose most suitable side of transom for mounting platform. Turn motor unit as far as possible to that side. Make a line on the transom indicating motor units full extension to that side.
• Position platform away from drawn line at desired mounting location, parallel to the water line, and mark 4 mounting holes through flattened ends of rails and/or struts onto the transom.
• Drill four marked holes with a bit compatible with selected fasteners (fasteners not provided). Hold drill perpendicular to transom when drilling.
• If transom is less than 2 thick, it is recommended that a backing plate be mounted on the inside of transom.
  • NOTE: The backing plate should be made of either aluminum, marine plywood or some other suitable non-compressive material.
• Coat the mounting surfaces of the rails and/or struts with a marine grade adhesive/caulking compound; squeeze a small amount into mounting holes in transom. Insert selected bolts through holes and secure in position with suitable fasteners.

Maintenance:

• Periodically check mounting hardware and re-tighten (due to normal boat operation).
• Regular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.

Information sourced from Garelick Assembly Instructions for Platforms Technical Data

Installation Instructions

Retaining Strap Installation Instructions

California Residents:
WARNING
Cancer and Reproductive Harm –
P65Warnings.ca.gov

Warranty Information

Limited Lifetime Warranty

Other Details

Google Product Type:
Boat Dock Ladders
Wiser:
Yes
Product MPN:
19546
Product UPC:
038203195469
Fast Ship:
In Stock Ships Today